Home Categories Send inquiry

Galvanized Steel Pipe – Royal Steel Group


galvanized steel pipe (45)
galvanized steel pipe (43)

Hot Dip Galvanized Pipe

 

The hot-dip galvanized pipe reacts the molten metal with the iron substrate to produce an alloy layer, so that the substrate and the coating are combined. Hot-dip galvanizing is to pickle the steel pipe first. In order to remove the iron oxide on the surface of the steel pipe, after pickling, it is cleaned by ammonium chloride or zinc chloride aqueous solution or a mixed aqueous solution of ammonium chloride and zinc chloride, and then sent to hot-dip coating tank. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life. The hot-dip galvanized steel pipe substrate undergoes complex physical and chemical reactions with the molten plating solution to form a corrosion-resistant zinc-iron alloy layer with a tight structure. The alloy layer is integrated with the pure zinc layer and the steel pipe substrate, so it has strong corrosion resistance.

Hot-dip galvanized steel pipes are widely used in construction, machinery, coal mines, chemicals, electric power, railway vehicles, automobile industry, highways, bridges, containers, sports facilities, agricultural machinery, petroleum machinery, prospecting machinery, greenhouse construction and other manufacturing industries.

 

 

Weight Factor

 

Nominal wall thickness (mm): 2.0, 2.5, 2.8, 3.2, 3.5, 3.8, 4.0, 4.5.

Coefficient parameters (c): 1.064, 1.051, 1.045, 1.040, 1.036, 1.034, 1.032, 1.028.

Note: The mechanical properties of steel are an important indicator to ensure the final use performance (mechanical properties) of steel, which depends on the chemical composition and heat treatment system of steel. In steel pipe standards, tensile properties (tensile strength, yield strength or yield point, elongation), hardness, toughness, and high and low temperature properties required by users are specified according to different use requirements.

Steel grades: Q215A; Q215B; Q235A; Q235B.

Test pressure value/Mpa: D10.2-168.3mm is 3Mpa; D177.8-323.9mm is 5Mpa

 

Current National Standard

 

National standard and size standard for galvanized pipe

GB/T3091-2015 Welded steel pipes for low-pressure fluid transportation

GB/T13793-2016 straight seam electric welded steel pipe

GB/T21835-2008 Welded steel pipe dimensions and weight per unit length